To gain full access to our webshop, find our entire product range and see our prices, you need to be logged in.
Log in to your account here or sign up as a customer here.
Log in to your account here or sign up as a customer here.
Anycubic AHPEGE-102 PETG Filament 1.75mm 1kg Grå
Anycubic AHPEGE-102 PETG - grå - 1 kg - PETG filament
-
Product no 1004284095
Model AHPEGE-102
Brand ANYCUBIC
EAN 6974662352774
Weight kg
-
Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
| Materiale | PETG |
| Vægt | 1 kg |
| Farve | Grey |
| Dry Out Before Use | Required |
| Drying Condition | 55-65 °C, 6-8 h |
| ACE Compatibility | Compatible |
| Nozzle Size | Recommended 0.2 mm or above |
| Printing Temperature | 230-250 ℃ |
| Heated Bed Temperature | 60-70 ℃ |
| Recommended Printing Speed | 50-250 mm/s |
| Maximum Volume Speed (Flow Rate) | 12 mm³/s |
| Density | 1.23 g/cm³ |
| Melt Index | 25±3 g/10 min (250℃/2.16kg) |
| Melting Point Temperature | 130 ℃ |
| Vicat Softening Temperature | 72 ℃ |
| Heat Deflection Temperature (0.45MPa) | 69 ℃ |
| Young's Modulus | 1850±100 Mpa |
| Tensile Strength | 52±1 Mpa |
| Elongation at Break | 13±1% |
| Bending Modulus | 2000±50 Mpa |
| Bending Strength | 80±2 MPa |
| lzod lmpact Strength (X-Y) | 22±2 kJ/m² |
| Tensile Strength (Z) | 45±1 MPa |